ASTROJET 3800 DRIVER

White streaks will then show up in the printed text or graphic. The adjustment range is in 0. In the P, Heads 5 and 6 can be combined with Heads 7 and 8 to print another 2″ of information. In normal operation, the printing is read from the operator side of the Printer. Jams In The Printer Nozzles. To print the manual completely, please, download it. Extra lines; losing data Improper output address Wrong Interface settings Check software or database on information out of order, miss- Static electricity Close AstroJet Control Panel feeding, etc.

Uploader: Shasida
Date Added: 16 May 2004
File Size: 10.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 77949
Price: Free* [*Free Regsitration Required]

These are initial settings. The Feeder can be permanently mounted by removing the four rubber feet, aligning the Feeder on the Support Stand, then reinstalling the feet to hold the Feeder in place. Extra lines; losing data Improper output address Wrong Interface settings Check software or database on information out of order, miss- Static electricity Close AstroJet Control Panel feeding, etc.

ASTROJET P? P OPERATOR’S MANUAL Pdf Download.

To print the manual completely, please, download it. Got it, continue to print. Allow enough room to place the Feeder on the same work surface. Enter text from picture: Then lock the Separators in position using the Separator Locking Lever. The Inkjet Cartridge The Inkjet Cartridges must be replaced when out of ink, when print quality is poor, or when purging and cleaning have not helped the image quality.

See Also  PACKARD BELL EASYNOTE BU45 DRIVER FOR WINDOWS 7

It is sometimes necessary to turn the printing direction degrees from the normal direction. Printheads to compensate for different media thickness.

By pressing ‘print’ button you will print only current page. Head 1 can be combined with Heads 2, 3 and 4 to print 2″ of information.

We have tried to make them astrijet complete as possible. Place the Feeder on a flat level surface. The best advice we can offer is to make sure that the system is setup properly, plugged in, that it has an adequate supply of ink before attempting to troubleshoot any problem.

AstroJet AstroJet 3800 Inkjet Cartridges – Q2344A (No. 1918) Cartridges

Install standard Cartridges as follows: Jams In The Printer Nozzles. Place the media under the Separators and release them so that they rest on the media.

Page of 34 Go.

Store the Cartridge in the Docking Station. Use one or two Center Straps [2] to help hold the media down. Depending on the types of media that are run, paper dust may accumulate within the Printer and on the Transport.

See Also  HP LASERJET M1522 MFP FAX DRIVER DOWNLOAD

The next time that the Printer is used, the Printhead may have to be cleaned and purged. Also turns the Printer off line to access the Menu Mode. Table of Contents Add to my manuals Add.

Control Panel Printheads to compensate for different astrojft thickness. The has six Printheads and the has eight Printheads. Installing The Printer Driver 6.

“20/20 – AMS Astrojet inkjet”

Place the Printer with the Feeder on a sturdy worktable or cabinet at least 12 inches from any walls. In normal operation, the printing is read from the operator side of the Printer. The windows for Windows and XP will be on the right.

Printing From Microsoft Word When you have completed the steps above, asrtojet layout should look like the one below. The adjustment range is in 0. The Printer must be cleaned regularly of accumulated paper dust and ink. When you have completed the steps above, the layout should look like the one below.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top