SAVIN C2828 DRIVERS DOWNLOAD

Do not let metal objects touch the development sleeve. The bearing is properly applied with lubricant. Make sure that the harness [A] is hooked as shown. Rotate the development roller [A] five or six times in the counterclockwise direction. Entering SP Mode 1. Otherwise, the hopper cover may be damaged.

Uploader: Douk
Date Added: 16 March 2008
File Size: 66.72 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 12106
Price: Free* [*Free Regsitration Required]

When you attach savin c2828 savkn drum unit to the development unit, remove a front cover and a front joint at first and use them for reassembling the new drum unit and development unit.

Enter the Service Mode. Turn the drum savin c2828 plate lever [B] and the image transfer unit lock lever [C] counter-clockwise. Open the drum positioning plate [D]. The steps below included directions for both savin c2828 procedures.

Majority of print quality problems are related to parts of the drum unit.

Leave a Reply Cancel reply You must be logged in to post a comment. Turn the machine power on.

See Also  PHILIPS CGA5722 MODEM DRIVER DOWNLOAD

Turn the machine power off. The machine initializes the developer and resets the PM counter for the developer. Front cover [A] Do not touch the bearing savin c2828 after removing the savinn cover.

Savin C Yellow Drum Replacement Service

The hook breaks easily. Pull out the PCU hold the grip while you pull it out.

C2288 not let savin c2828 objects touch the development sleeve. When the development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Do not touch the OPC drum. Otherwise, the savin c2828 cover may be damaged.

You must be logged in to post a comment. Savin C Yellow Drum Replacement — What follows are the guidelines for the drum and developer restoration. Remove the front joint [A] The front joint [D] is firmly set. savin c2828

C/CG/C/CG download page

Keep the developer off savin c2828 both ends of the development unit enclosed in red lines in the diagram. Lever lock [A] 3. Hopper cover [A] 4 hooks Release the three hooks first in the correct order Put the head of a screwdriver in the savin c2828 gap [B] as saavin, and then release the hook.

See Also  EMACHINES E525 WIRELESS DRIVER DOWNLOAD

Reattach the hopper cover hook x 3. Make sure that the harness [A] is hooked as shown.

Product Center

Remove it with a flat screwdriver. If you change the development unit, do the ACC procedure. Shake a bag of developer savin c2828 pour it into the development hopper [A]. Drum unit [A] and Wavin Unit [B] 8. The savin c2828 drum unit has a front cover and a front joint.

Follow the correct order. Do the ACC procedure. When reassembling the PCU: This step removes developer that has stuck to the savin c2828 roller, which would cause color unevenness.

Open the front door.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top